Login
Sign Up
Since 1923
728
Gard / configure
PN: GAR61            

Please log in to configure this product.

Project:
New Project
Date:
Type:
Qty:
RAL #:

Freight/Crate/RAL charges may apply. Contact TMS Lighting 1-866-793-1174 or e-mail.
Print Configuration
Save Configuration
Contact Local Rep

Specifications are subject to change without notice.

Version 1.3

Lamping
15LED2
2×15W LED
n/a
LED CCT (color temperature)
30K
3000K
n/a
35K
3500K
n/a
40K
4000K
n/a
Voltage
120
120V
n/a
277
277V
n/a
Finish
F05
White
n/a
F09
Pewter
n/a
F15
Matte Black
n/a
F16
Gloss Black
n/a
F18
Flat Aluminum
n/a
F19
Mirror Silver
n/a
F21
Architectural Bronze
n/a
F31
Silver Metallic
n/a
F32
Bronze Metallic
n/a
F33
Pyrite Bronze
n/a
RAL
RAL Custom Color (specify)
n/a
Dimming
----
None
n/a
DIML
LED Dimming (0-10V, current-sinking)
Use a current-sinking dimming system (by others) with this option.
n/a
Emergency
----
None
n/a
EMR
Remote LED
(20 ft. / 6.096 m max. distance from EM to LED; min. operating temp. +5C/+40F; dry location mounting)
n/a
EMCR
Remote LED cold pack
(20 ft. / 6.096 m max. distance from EM to LED; min. operating temp. -20C/-4F)
n/a
Gard / Notes
PN: GAR61            

NOTES:

Control Systems — Compatibility of this product is not guaranteed with all control systems. For 0-10V dimming signal wire, use a minimum 18AWG cable.

LED Circuits — LED fixtures should be installed on a dedicated circuit. If a relay switch is required, use a solid state type. A mechanical relay could induce a surge of 10-30 times above normal.

Lead Times — This product is manufactured to order. Please contact your local sales representative for the current lead time.

Specifications and availability are subject to change.

Installation should only be performed by a qualified electrical contractor, and in accordance with national and local safety, building, and electrical codes.

Gard / details
PN: GAR61            
Construction
The enclosure and is manufactured with high grade aluminum (outdoor), or steel (indoor), with stainless steel hardware.
Lamping
2x 15W Cree™ LED; specify 3000K, 3500K or 4000K CCT.

Note: LED systems operate with 120-277V supply voltage only.
LED modules do not require a socket, and are wired directly to the integral driver.

Diffuser
The Gard is equipped with 2 clear lenses, sealed and gasketed to the enclosure.
LED Driver
The LED source is controlled by an advanced electronic driver that delivers consistent power. LED drivers are electronic, and available for integral and remote mounting, indoor or outdoor.
Surge Suppressor
All 120V, 277V and universal voltage LED luminaires are protected by a 6kV surge suppressor.
Dimming
The dimming option is the 0-10V, current-sinking type, with pulse width modulation (PWM).

Note: Use a current-sinking dimming system (by others) with this option. The compatibility of this product is not guaranteed with all control systems.

Emergency
Remote emergency back-ups are available, in the standard temperature and cold temperature types.

Note: The emergency option is available with 120-277V systems only.
EMR Remote LED: (20 ft. / 6.096 m max. distance from EM to LED; min. operating temp. +5C/+40F; dry location mounting)
EMCR Remote LED with Cold Pack: (20 ft. / 6.096 m max. distance from EM to LED; min. operating temp. -20C/-4F)
The test switch and indicator light would be remote.

Finish
Available with TMS premium polyester powder-coated finishes; see the "finishes and Diffusers" chart.
Custom RAL finishes are available by special order.
Mounting
Mount on a wall, directly to a standard 4” electrical junction box.
Follow the installation instructions, and adhere to the local electrical code.
Compliances
Rated IP55 for use in dry to wet locations. Certified UL 1598 C-US, QPS, CSA and CSA-US standards.
The Consultants Europe (CE) listing is available upon request.
details
notes