Please log in to configure this product.
Specifications are subject to change without notice.
Control Systems — Compatibility of this product is not guaranteed with all control systems. For 0-10V dimming signal wire, use a minimum 18AWG cable.
LED Circuits — LED fixtures should be installed on a dedicated circuit. If a relay switch is required, use a solid state type. A mechanical relay could induce a surge of 10-30 times above normal.
Lead Times — This product is manufactured to order. Please contact your local sales representative for the current lead time.
Specifications and availability are subject to change.
Installation should only be performed by a qualified electrical contractor, and in accordance with national and local safety, building, and electrical codes.
Note: Incandescent systems, metal halide systems, and those using the 17W LED PAR 38 lamp, use a medium base socket (E26).
Note: G1, G3, G11 and G11P are used with 100IN, 32CF, and 15LED max.
Globes are not available with the 17W LED PAR 38 lamps.
Note: Use a current-sinking dimming system (by others) for LED dimming.
Compatibility of this product is not guaranteed with all control systems.
Dimming is not available with 347V systems, or for outdoor CF applications.
Note: The test switch and indicator light would be remote.
See specifications in “Emergency Backups for Pendant Lights”.
Note: A clear coat is applied to copper, yet patina will form over time.
Note: The aircraft cable or ceiling slope adapter may be required to comply with the local seismic/earthquake code.
Follow the installation instructions, and adhere to your local electrical code.