Please log in to configure this product.
Specifications are subject to change without notice.
Version 1.3
NOTES:
Control Systems — Compatibility of this product is not guaranteed with all control systems. For 0-10V dimming signal wire, use a minimum 18AWG cable.
LED Circuits — LED fixtures should be installed on a dedicated circuit. If a relay switch is required, use a solid state type. A mechanical relay could induce a surge of 10-30 times above normal.
Lead Times — This product is manufactured to order. Please contact your local sales representative for the current lead time.
Specifications and availability are subject to change.
Installation should only be performed by a qualified electrical contractor, and in accordance with national and local safety, building, and electrical codes.
Note: LED systems use 120-277V supply voltage, and are not compatible with 347V.
Note: Use a current-sinking dimming system (by others) for LED dimming.
The dimming option is not available with 347V systems, or for outdoor CF applications.
Compatibility of this product is not guaranteed with all control systems.
Note: The emergency option is available with 120-277V systems only.
The test switch and indicator light would be remote.
EMR Remote LED: (20 ft. / 6.096 m max. distance from EM to LED; min. operating temp. +5C/+40F; dry location mounting)
EMR Remote CF: (7 ft. / 2.134 m max. distance from EM to lamp; min. operating temp. +5C/+40F; dry location only)