Please log in to configure this product.
Specifications are subject to change without notice.
Control Systems — Compatibility of this product is not guaranteed with all control systems. For 0-10V dimming signal wire, use a minimum 18AWG cable.
LED Circuits — LED fixtures should be installed on a dedicated circuit. If a relay switch is required, use a solid state type. A mechanical relay could induce a surge of 10-30 times above normal.
Lead Times — This product is manufactured to order. Please contact your local sales representative for the current lead time.
Specifications and availability are subject to change.
Installation should only be performed by a qualified electrical contractor, and in accordance with national and local safety, building, and electrical codes.
Note: Use a current-sinking dimming system (by others) with this option.
Compatibility of this product is not guaranteed with all control systems.
Note: The test switch and indicator light would be remote.
Remote LED: (20 ft. / 6.096 m max. distance from EM to LED; min. operating temp. +5C/+40F; dry location)
Note: The aircraft cable or ceiling slope adapter may be required to comply with the local seismic/earthquake code.
Follow the installation instructions, and adhere to your local electrical code.
Note: A clear coat is applied to copper, yet patina will form over time.